Jobs in Port Neches

I&E Maintenance Engineer

Job Description : Indorama Integrated Oxides & Derivatives is looking for an experienced I&E Maintenance Engineer to join our team in Port Neches, Texas. The I&E Maintenance Engineer is responsible for providing both instrument and electrical engineering expertise to an assigned area of the site. This position is to assure proper design, change management, installation and repair of instrument and electrical equipment according to regulatory and Indorama standards. This position will be the focal point for all changes involving, but not limited to; instrumentation, control valves, motors, switchgear, motor control centers/starters and transformers. The I&E Engineer will work closely with engineering, maintenance, and operations to understand needs and requirements and to provide a design and installation package. The I&E Engineer is responsible for Management of Change (MOC) for the assigned area, assist with turnaround scope development, and initiating change requests during turnarounds for impacts to instrumentation, valves, electrical equipment, motors, and the like. What will be expected from you? Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. Provide PM development input, primarily through the RCM AMP process. Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. Provide support for T&I (turnaround and inspection) work scope development. Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. Assist with the site's bad actor program. Identify the site's bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Including but not limited to: participates in all phases of capital projects; (e.g. ensure project complies with site standards, practices and goals) power study reviews, specification reviews, participation in HAZOP/DHR, provide alternative selection/options with multiple solutions. Ensure projects are designed for maintainability and reliability. Assist in set up of spare parts as required. Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. For very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option. Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the ideal candidate? BS Electrical Engineering or equivalent required. 0-2 years I&E Maintenance or Reliability Engineering experience required , 5 years I&E Maintenance or Reliability Engineering experience preferred. Must have or be able to obtain TWIC card. Must have a level of proficiency with Internet, Email, and Microsoft programs. Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows. Strong communication and documentation skills. Willing and able to learn on the job. Knowledge of risk-based work prioritization methodology. Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired. What can we offer you? Indorama Ventures Oxides & Derivatives is a leading chemical intermediates and surfactants producer with a diverse range of products in growth markets such as home & personal care, agrochemicals, oilfield technologies, fuel & lube additives and more. The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! Additional Locations:

Work Life Balance

I&E Maintenance Engineer

Pacifica Continental Port Neches, TX

Position Overview: Our client, a leading producer of chemical intermediates and surfactants, is seeking an experienced I&E Maintenance Engineer to join their team in Port Neches, Texas. This role focuses on providing specialized instrument and electrical engineering support for a designated area of the site, ensuring compliance with both regulatory and company standards in design, installation, and repair of equipment. The I&E Maintenance Engineer will be the central point for modifications related to instrumentation, control valves, motors, switchgear, motor control centers, starters, and transformers. Collaboration with engineering, maintenance, and operations teams is essential for aligning project requirements and delivering comprehensive design and installation packages. Additionally, the engineer will oversee Management of Change (MOC) for their area, contribute to turnaround scope planning, and implement necessary changes during turnarounds. Key Responsibilities: Offer technical support for electrical and instrumentation maintenance, troubleshooting, and operation of site systems and equipment. Participate in the development and implementation of the RCM (Reliability Centered Maintenance) Asset Management Plan. Support preventive maintenance (PM) program development, reviewing and enhancing PM strategies to improve equipment health and system effectiveness. Assist in defining turnaround and inspection (T&I) work scope. Lead or contribute to incident investigations and follow-up documentation for high-impact events. Collaborate with operating and maintenance engineers to drive improvements in equipment reliability, efficiency, and long-term operability. Support the site's bad actor program by identifying equipment with high failure rates, driving root cause analysis, and implementing solutions. Provide guidance and resources for instrumentation and electrical system investments, ensuring project compliance with site standards and operational goals. Participate in all phases of capital projects, including HAZOP/DHR reviews, power studies, and specification reviews, and contribute to alternative solutions and design for reliability. Coordinate with stakeholders to ensure spare parts setup and identify capital/expense projects to enhance reliability and maintainability. Act as a facilitator for problem analysis and risk assessment, particularly in cases of critical equipment failures with unclear root causes. Collaborate with diverse teams including technicians, process operators, control engineers, and maintenance leaders. Ensure compliance with integrated management systems (safety, GMP, environmental, quality, and responsible care standards). Regular presence at the workplace with flexibility to work additional hours as necessary to support daily production goals. Work effectively with team members from diverse backgrounds and perspectives. Support company goals, follow instructions, and perform other tasks as assigned by supervisors. Participate in company Environmental, Health, & Safety initiatives and complete required training programs. Ideal Candidate Profile: Bachelor's degree in Electrical Engineering REQUIRED 0-2 years of I&E Maintenance or Reliability Engineering experience required, with 5 years preferred. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Proficiency in Internet, Email, and Microsoft Office programs. Strong knowledge of control systems including control valves, transmitters, pneumatic/electronic instrumentation, and PLC/DCS. Basic understanding of engineering, purchasing, accounting, and construction practices, as well as maintenance workflows. Excellent communication and documentation skills. Willingness and ability to learn on the job. Familiarity with risk-based work prioritization and economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge of Reliability Centered Maintenance or Asset Management Plan development is preferred. What can we offer you? The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us!

Work Life Balance

I&E Maintenance Engineer

Pacifica Continental Port Neches, TX

For a leading sustainability company, we are looking for an I&E Maintenance Engineer. This role will work closely with engineering, maintenance, and operations to understand needs and requirements and to provide a design and installation package. The I&E Engineer is responsible for Management of Change (MOC) for the assigned area, assist with turnaround scope development, and initiating change requests during turnarounds for impacts to instrumentation, valves, electrical equipment, motors, and the like. What will be expected from you? Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. Provide PM development input, primarily through the RCM AMP process. Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. Provide support for T&I (turnaround and inspection) work scope development. Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. Assist with the site’s bad actor program. Identify the site’s bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Including but not limited to: participates in all phases of capital projects; (e.g. ensure project complies with site standards, practices and goals) power study reviews, specification reviews, participation in HAZOP/DHR, provide alternative selection/options with multiple solutions. Ensure projects are designed for maintainability and reliability. Assist in set up of spare parts as required. Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. For very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option. Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the ideal candidate? BS Electrical Engineering or equivalent required. 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred. Must have or be able to obtain TWIC card. Must have a level of proficiency with Internet, Email, and Microsoft programs. Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows. Strong communication and documentation skills. Willing and able to learn on the job. Knowledge of risk-based work prioritization methodology. Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired. #J-18808-Ljbffr

I&E Project Manager

Pacifica Continental Port Neches, TX

Position Overview: Our client, a leading producer of chemical intermediates and surfactants, is seeking an I&E Project Manager for their Port Neches, Texas site. This key role assumes responsibility, authority, and accountability for large-scale capital projects ranging from $500M to $50MM, leading diverse teams throughout each project's lifecycle. The Project Manager will oversee the complete execution of projects, ensuring they meet targets for cost management, resource allocation, timelines, and functionality. Additionally, the role may involve serving as the lead Mechanical Design Engineer on assigned projects. Key Responsibilities: Actively manage and execute capital and expense projects, aligning engineering and construction resources with project schedules and budgets. Collaborate with the Front End Loading Engineering Manager to develop new project concepts that align with site execution processes. Conduct and participate in scope reviews, develop project justifications, and create presentations for site and senior leadership. Offer technical solutions to plant issues within your area of expertise. Lead project workflow implementation, using both internal and external resources, to achieve effective and efficient project execution. Meet Key Performance Indicators (KPIs) related to Safety, Schedule, Cost, and Operational Performance to ensure project execution. Ensure projects comply with safety and environmental standards, including conducting Process Safety Management reviews and maintaining required documentation. Communicate project status updates consistently to site and corporate stakeholders. Oversee all aspects of project scope, including cost estimation, engineering design, drafting, construction, commissioning, documentation, and training. Comply with integrated management systems regarding safety, food safety, GMP, health, environmental quality, and responsible care standards. Work on-site regularly, with flexibility to work additional hours if required, to support daily production goals. Collaborate effectively with team members of diverse backgrounds and perspectives. Support company goals and adhere to all Environmental, Health, and Safety initiatives and training. Ideal Candidate Profile: Bachelor’s degree in Electrical Engineering REQUIRED At least 10 years of electrical engineering experience preferred with knowledge of instrumentation, controls, and electrical distribution. Experience in front-end and detailed design project functions is advantageous. Familiarity with project execution staged gate processes is preferred. Must hold or be able to obtain a Transportation Worker Identification Credential (TWIC). Eligibility and requirements can be found at (https://www.tsa.gov/for-industry/twic). CAPM certification is preferred; PMP or PgMP certification is highly desirable. Proficiency in Internet, Email, Microsoft Office, project scheduling software (such as Primavera P6 and MS Project), and SAP experience is a plus. Strong communication, presentation, planning, and organizational skills. Proven problem-solving skills, with a strategic, analytical approach to identifying optimal solutions. Ability to build relationships and lead cross-functional teams. Expertise in engineering principles, environmental regulations, project management, workplace safety, budgeting, and personnel management. Knowledge of high-power electrical distribution systems (up to 69kV), distributed control systems (Foxboro and DeltaV), and process instrumentation/control system design. What can we offer you? The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us!#J-18808-Ljbffr

I/E Maintenance & Reliability Engineer

Belcan Corporation Port Neches, TX

Job Details I/E Maintenance & Reliability Engineer Location: Port Neches, TX Zip Code: 77651 Start Date: Right Away Job Type: Contract Pay Rate: Up to $56.00/hr DoE JOB RESPONSIBILITIES: Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. Provide PM development input, primarily through the RCM AMP process. Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. Provide support for T&I (turnaround and inspection) work scope development. Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. Assist with the site's bad actor program. Identify the site’s bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Participates in all phases of capital projects; ensure project complies with site standards, practices and goals. Ensure projects are designed for maintainability and reliability. Assist in set up of spare parts as required. Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. for very critical equipment failures. Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. Ability to work overtime if/when needed. REQUIRED QUALIFICATIONS: BS Electrical Engineering or equivalent required. 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred. TWIC - Must have or be able to obtain TWIC card. Technical troubleshooting/root cause analysis. Must have self-motivation skills. Must have a level of proficiency with Internet, Email, and Microsoft programs. Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows. Strong communication and documentation skills. Willing and able to learn on the job. Knowledge of risk-based work prioritization methodology. Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com. EOE/F/M/Disability/Veterans #J-18808-Ljbffr

Posted 12 hours ago

Work Life Balance

I/E Maintenance & Reliability Engineer

Belcan Port Neches, TX

I/E Maintenance & Reliability Engineer Job Number: 354843 Category: Industrial Engineering Description: Job Title: I/E Maintenance & Reliability Engineer Location: Port Neches, TX Zip Code: 77651 Start Date: Right Away Job Type: Contract Pay Rate: Up to $56.00/hr DoE Keywords: #maintenanceengineer #reliabilityengineer #TXjobs JOB RESPONSIBILITIES: Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. Provide PM development input, primarily through the RCM AMP process. Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. Provide support for T&I (turnaround and inspection) work scope development. Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. Assist with the site"s bad actor program. Identify the site"s bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Including but not limited to: participates in all phases of capital projects; (e.g. ensure project complies with site standards, practices and goals) power study reviews, specification reviews, participation in HAZOP/DHR, provide alternative selection/options with multiple solutions. Ensure projects are designed for maintainability and reliability. Assist in set up of spare parts as required. Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. for very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. Ability to work overtime if/when needed REQUIRED QUALIFICATIONS: BS Electrical Engineering or equivalent required 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred TWIC - Must have or be able to obtain TWIC card Technical troubleshooting/root cause analysis Must have self-motivation skills Must have a level of proficiency with Internet, Email, and Microsoft programs Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows Strong communication and documentation skills Willing and able to learn on the job Knowledge of risk-based work prioritization methodology Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost) Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com EOE/F/M/Disability/Veterans Location: Port Neches , TX Minimum Experience (yrs): 0-2 Required Education: Bachelor (BA, BS...) Benefits: Return to search results Email this job to a friend (emailjobs.asp?jo_num=354843) If you have previously registered with us, pleaseLog in (memberlogin.asp) to apply for this position. *Logged in members may also add jobs to their job cart

I/E Maintenance and Reliability Engineer

Hunt-Guillot & Associates Port Neches, TX

Position Summary & Duties: The I/E Maintenance Engineer is a 12-month contract position working on-site for our Specialty Chemical Client located in Port Neches, TX. This role manages design, change management, installation, and repairs for instrumentation, control valves, motors, switchgear, motor control centers, and transformers. The engineer collaborates with engineering, maintenance, and operations to develop design and installation packages and oversees Management of Change (MOC) and turnaround scope development. Essential Job Duties and Responsibilities: - Provide technical support for maintenance, operations, and troubleshooting of instrumentation, control systems, and electrical equipment. - Develop and implement reliability-centered maintenance (RCM) asset management plans. - Audit and improve PM programs to enhance equipment reliability. - Support turnaround and inspection (T&I) scope development. - Investigate high-impact incidents and recommend improvements for reliability and efficiency. - Identify and mitigate bad actor equipment failures. - Provide leadership on instrumentation and electrical system modifications and capital projects. - Ensure projects align with site standards, maintainability, and reliability requirements. - Collaborate with cross-functional teams, including technicians, engineers, and operators. - Ensure compliance with safety, environmental, and quality management systems. - Participate in company training and safety initiatives. Qualifications: Job Requirements: • BS Electrical Engineering or equivalent required • 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred • TWIC - Must have or be able to obtain TWIC card • Must have a level of proficiency with Internet, Email, and Microsoft programs • Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. • Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows • Strong communication and documentation skills • Knowledge of risk-based work prioritization methodology • Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost) • Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired Top 3 Must-Have Skills: 1. BSEE or equivalent required, experience preferred (ideally at a petrochemical plant) 2. Technical troubleshooting/root cause analysis 3. Self-motivation Equal Opportunity Employer/Veterans/Disabled #IND1 #LI-CB1

Work Life Balance

I&E Project Manager

Pacifica Continental Port Neches, TX

Position Overview: Our client, a leading producer of chemical intermediates and surfactants, is seeking an I&E Project Manager for their Port Neches, Texas site. This key role assumes responsibility, authority, and accountability for large-scale capital projects ranging from $500M to $50MM, leading diverse teams throughout each project's lifecycle. The Project Manager will oversee the complete execution of projects, ensuring they meet targets for cost management, resource allocation, timelines, and functionality. Additionally, the role may involve serving as the lead Mechanical Design Engineer on assigned projects. Key Responsibilities: Actively manage and execute capital and expense projects, aligning engineering and construction resources with project schedules and budgets. Collaborate with the Front End Loading Engineering Manager to develop new project concepts that align with site execution processes. Conduct and participate in scope reviews, develop project justifications, and create presentations for site and senior leadership. Offer technical solutions to plant issues within your area of expertise. Lead project workflow implementation, using both internal and external resources, to achieve effective and efficient project execution. Meet Key Performance Indicators (KPIs) related to Safety, Schedule, Cost, and Operational Performance to ensure project execution. Ensure projects comply with safety and environmental standards, including conducting Process Safety Management reviews and maintaining required documentation. Communicate project status updates consistently to site and corporate stakeholders. Oversee all aspects of project scope, including cost estimation, engineering design, drafting, construction, commissioning, documentation, and training. Comply with integrated management systems regarding safety, food safety, GMP, health, environmental quality, and responsible care standards. Work on-site regularly, with flexibility to work additional hours if required, to support daily production goals. Collaborate effectively with team members of diverse backgrounds and perspectives. Support company goals and adhere to all Environmental, Health, and Safety initiatives and training. Ideal Candidate Profile: Bachelor's degree in Electrical Engineering REQUIRED At least 10 years of electrical engineering experience preferred with knowledge of instrumentation, controls, and electrical distribution. Experience in front-end and detailed design project functions is advantageous. Familiarity with project execution staged gate processes is preferred. Must hold or be able to obtain a Transportation Worker Identification Credential (TWIC). Eligibility and requirements can be found at (https://www.tsa.gov/for-industry/twic). CAPM certification is preferred; PMP or PgMP certification is highly desirable. Proficiency in Internet, Email, Microsoft Office, project scheduling software (such as Primavera P6 and MS Project), and SAP experience is a plus. Strong communication, presentation, planning, and organizational skills. Proven problem-solving skills, with a strategic, analytical approach to identifying optimal solutions. Ability to build relationships and lead cross-functional teams. Expertise in engineering principles, environmental regulations, project management, workplace safety, budgeting, and personnel management. Knowledge of high-power electrical distribution systems (up to 69kV), distributed control systems (Foxboro and DeltaV), and process instrumentation/control system design. What can we offer you? The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us!

I&E Maintenance Specialist

Indorama Ventures Port Neches, TX

Job Description : PNO I&E Maintenance Specialist serves a critical role in sustaining and implementing improved maintenance knowledge in Reliability, Operations, and technical organizations. Provides a key link between the maintenance, reliability and operations groups to ensure alignment of team objectives. What will be expected from you? Encourage and target a zero safety and environmental incident rate for unit. Instill by example a high degree of safety and environmental work ethic. Key interface between unit maintenance and Engineering functions. I&E Maintenance representative for PHA when required - limited basis. I&E Maintenance representative for capital and expense projects - ensure proposed designs are safe, efficient, and workable within the context of the overall operation of the plant. MOC review Team - reviewer and team participant as required / approves PSSR before unit restart. Continuity of technical knowledge. Review and approve control changes working closely between Maintenance and Operations. Advocate for technical improvements working actively between Operations, Maintenance, and technical disciplines. Training: Training, technical skills development for Instrument and Electrical Technicians positions. Utilize technical information such as technical reports and incident investigations to develop communications and technical training. Incorporate technical information within procedures / member of the team to improve technical knowledge and execution of operating capabilities. Ensure that technical information contained in procedures is accurate and available in required amount of detail. Review all new or modified procedures to ensure accuracy and applicability. Continuous improvement in maintenance procedures and updates as new or modified understanding of maintenance information becomes available. Help Develop annual training I/E technician schedule. Validate progress of training - develop periodic updates / working sessions for PNO Management to ensure gaps are addressed. Audit and test as training progresses to ensure only qualified and capable individuals are certified. Additional Periodic Roles: Turnaround development and execution - could include any of following: Scope development. Clearing and blinding strategy development - as pertains to I/E work. Work plan review and validation - walk downs, limited basis. Multiple potential execution roles. I&E Team Leader backfill - Limited basis. Site-wide initiatives - maintenance, reliability, etc. Safety or environmental audit team participation. Participate in incident investigations. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company-required training programs. What are we looking for in the ideal candidate? Associate Degree in Instrumentation - industrial electricity, or nationally recognized training program (e.g. electrical JAT, etc.) AND a minimum of 5 years relevant I&E Maintenance experience in a petrochemical or refining facility; OR a minimum of 10 years relevant I&E Maintenance experience in a petrochemical or refining facility. Associate Degree or certification is preferred. Must have or be able to obtain Transportation Worker Identification Credential (TWIC) card. State of Texas Electrical Journeyman licenses a plus. Must have a level of proficiency with SAP, Internet, Email and Microsoft Office programs. Proven ability to understand complex unit processes. What can we offer you? Indorama Ventures - Indovinya is a global and innovative chemical company, offering sustainable and high-value solutions for the long-term success of our customers. As producers of solutions used in Crop Solutions, Energy & Resources, Home & Personal Care, Coatings, Performance Products, and other applications, we are present in the daily lives of millions of people around the world. The successful candidate will receive competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! #LI- ONSITE Additional Locations:

I&E Project Manager

Pacifica Continental Port Neches, TX

Job Description Job Description Position Overview: Our client, a leading producer of chemical intermediates and surfactants, is seeking an I&E Project Manager for their Port Neches, Texas site. This key role assumes responsibility, authority, and accountability for large-scale capital projects ranging from $500M to $50MM, leading diverse teams throughout each project's lifecycle. The Project Manager will oversee the complete execution of projects, ensuring they meet targets for cost management, resource allocation, timelines, and functionality. Additionally, the role may involve serving as the lead Mechanical Design Engineer on assigned projects. Key Responsibilities: Actively manage and execute capital and expense projects, aligning engineering and construction resources with project schedules and budgets. Collaborate with the Front End Loading Engineering Manager to develop new project concepts that align with site execution processes. Conduct and participate in scope reviews, develop project justifications, and create presentations for site and senior leadership. Offer technical solutions to plant issues within your area of expertise. Lead project workflow implementation, using both internal and external resources, to achieve effective and efficient project execution. Meet Key Performance Indicators (KPIs) related to Safety, Schedule, Cost, and Operational Performance to ensure project execution. Ensure projects comply with safety and environmental standards, including conducting Process Safety Management reviews and maintaining required documentation. Communicate project status updates consistently to site and corporate stakeholders. Oversee all aspects of project scope, including cost estimation, engineering design, drafting, construction, commissioning, documentation, and training. Comply with integrated management systems regarding safety, food safety, GMP, health, environmental quality, and responsible care standards. Work on-site regularly, with flexibility to work additional hours if required, to support daily production goals. Collaborate effectively with team members of diverse backgrounds and perspectives. Support company goals and adhere to all Environmental, Health, and Safety initiatives and training. Ideal Candidate Profile: Bachelor’s degree in Electrical Engineering REQUIRED At least 10 years of electrical engineering experience preferred with knowledge of instrumentation, controls, and electrical distribution. Experience in front-end and detailed design project functions is advantageous. Familiarity with project execution staged gate processes is preferred. Must hold or be able to obtain a Transportation Worker Identification Credential (TWIC). Eligibility and requirements can be found at (https://www.tsa.gov/for -industry/twic). CAPM certification is preferred; PMP or PgMP certification is highly desirable. Proficiency in Internet, Email, Microsoft Office, project scheduling software (such as Primavera P6 and MS Project), and SAP experience is a plus. Strong communication, presentation, planning, and organizational skills. Proven problem-solving skills, with a strategic, analytical approach to identifying optimal solutions. Ability to build relationships and lead cross-functional teams. Expertise in engineering principles, environmental regulations, project management, workplace safety, budgeting, and personnel management. Knowledge of high-power electrical distribution systems (up to 69kV), distributed control systems (Foxboro and DeltaV), and process instrumentation/control system design. What can we offer you? The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! Powered by JazzHR 9R5cTVSGwQ

Dynamic Environment

I&E Maintenance Engineer

Pacifica Continental Port Neches, TX

Job Description Job Description Position Overview: Our client, a leading producer of chemical intermediates and surfactants, is seeking an experienced I&E Maintenance Engineer to join their team in Port Neches, Texas. This role focuses on providing specialized instrument and electrical engineering support for a designated area of the site, ensuring compliance with both regulatory and company standards in design, installation, and repair of equipment. The I&E Maintenance Engineer will be the central point for modifications related to instrumentation, control valves, motors, switchgear, motor control centers, starters, and transformers. Collaboration with engineering, maintenance, and operations teams is essential for aligning project requirements and delivering comprehensive design and installation packages. Additionally, the engineer will oversee Management of Change (MOC) for their area, contribute to turnaround scope planning, and implement necessary changes during turnarounds. Key Responsibilities: Offer technical support for electrical and instrumentation maintenance, troubleshooting, and operation of site systems and equipment. Participate in the development and implementation of the RCM (Reliability Centered Maintenance) Asset Management Plan. Support preventive maintenance (PM) program development, reviewing and enhancing PM strategies to improve equipment health and system effectiveness. Assist in defining turnaround and inspection (T&I) work scope. Lead or contribute to incident investigations and follow-up documentation for high-impact events. Collaborate with operating and maintenance engineers to drive improvements in equipment reliability, efficiency, and long-term operability. Support the site’s bad actor program by identifying equipment with high failure rates, driving root cause analysis, and implementing solutions. Provide guidance and resources for instrumentation and electrical system investments, ensuring project compliance with site standards and operational goals. Participate in all phases of capital projects, including HAZOP/DHR reviews, power studies, and specification reviews, and contribute to alternative solutions and design for reliability. Coordinate with stakeholders to ensure spare parts setup and identify capital/expense projects to enhance reliability and maintainability. Act as a facilitator for problem analysis and risk assessment, particularly in cases of critical equipment failures with unclear root causes. Collaborate with diverse teams including technicians, process operators, control engineers, and maintenance leaders. Ensure compliance with integrated management systems (safety, GMP, environmental, quality, and responsible care standards). Regular presence at the workplace with flexibility to work additional hours as necessary to support daily production goals. Work effectively with team members from diverse backgrounds and perspectives. Support company goals, follow instructions, and perform other tasks as assigned by supervisors. Participate in company Environmental, Health, & Safety initiatives and complete required training programs. Ideal Candidate Profile: Bachelor’s degree in Electrical Engineering REQUIRED 0-2 years of I&E Maintenance or Reliability Engineering experience required, with 5 years preferred. Must have or be able to obtain a Transportation Worker Identification Credential (TWIC). Proficiency in Internet, Email, and Microsoft Office programs. Strong knowledge of control systems including control valves, transmitters, pneumatic/electronic instrumentation, and PLC/DCS. Basic understanding of engineering, purchasing, accounting, and construction practices, as well as maintenance workflows. Excellent communication and documentation skills. Willingness and ability to learn on the job. Familiarity with risk-based work prioritization and economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge of Reliability Centered Maintenance or Asset Management Plan development is preferred. What can we offer you? The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! Powered by JazzHR Exhyd1GDSD

Maintenance Reliability Engineer

LanceSoft, Inc. Port Neches, TX

Job Title: I/E Maintenance & Reliability Engineer Location: Port Neches, TX Contract Duration: 12+ months (Contract to Possible Extension or Conversion) Salary: $45-59.00/hr W2 (All Inclusive) Top 3 Must-Have Skills BSEE or equivalent required, experience preferred (ideally at a petrochemical plant) Technical troubleshooting/root cause analysis Self-motivation General Purpose of Job: The I&E Maintenance Engineer is responsible for providing both instrument and electrical engineering expertise to an assigned area of the site. This position is to assure proper design, change management, installation, and repair of instrument and electrical equipment according to regulatory and Indorama standards. This position will be the focal point for all changes involving instrumentation, control valves, motors, switchgear, motor control centers/starters, and transformers. Prioritized Essential Job Functions and Responsibilities: With moderate supervision and moderate decision-making: Provides electrical and instrument technical support for maintenance, operation, and troubleshooting of site instrumentation, control, electrical equipment, and systems. Participates in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. Provides PM development input, primarily through the RCM AMP process. Audits and improves instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes, and PM data. Provides support for T&I (turnaround and inspection) work scope development. Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. Assists with the site’s bad actor program. Identifies the site’s bad actors based on a combination of production loss and failure frequency. Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Ensures projects are designed for maintainability and reliability. Provides capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Interfaces with diverse groups including instrument technicians, electrical technicians, process operators, and engineers. Ensures that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality, and responsible care requirements). Participates in Environmental, Health, & Safety initiatives as set forth by the company. Education/Experience/Skills Requirements: BS Electrical Engineering or equivalent required 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years preferred TWIC – Must have or be able to obtain TWIC card Specific Skills and Knowledge: Must have proficiency with Internet, Email, and Microsoft programs Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. Basic understanding of engineering, purchasing, accounting, and construction practices and maintenance workflows Strong communication and documentation skills Willing and able to learn on the job Knowledge of risk-based work prioritization methodology Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost) Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired Seniority Level: Mid-Senior level Employment Type: Full-time Job Function: Manufacturing, Engineering, and Other Industries: Wholesale Petroleum and Petroleum Products, Oil and Gas, and Chemical Manufacturing #J-18808-Ljbffr

SIS Engineer

Hargrove and Associates, Inc Port Neches, TX

Hargrove supplies unparalleled services in engineering, procurement, construction management, and technical services in the industrial, commercial, and government sectors. With over 2,700 Teammates in 19 offices domestically and internationally, we build long-term support relationships in the energy generation, manufacturing, research and development, and process-heavy industry in on-site support arrangements, in plant-level small projects and consulting roles, and in larger capital projects. Hargrove’s key operating principle is to provide the Right People, in the Right Place, at the Right Time. We believe that relationships and partnering together provide the best results and long-term benefits for our clients. Work-life balance and flexibility are important areas of focus for Hargrove. We’re happy to discuss flexible working hours, patterns, and locations to suit you and the business. What You'll Be Doing Job Scope: The primary objective of the Instrument/Electrical (I/E) Functional Safety Engineer is to drive project implementation focused on Safety Instrumented System (SIS) lifecycle management for our manufacturing site. In this role you will develop and steward our project systems/processes, which will help improve the site’s overall instrumentation and electrical assets. This role is located in Port Neches, TX. Primary responsibilities will include but not be limited to: Provide design engineering support for projects. Responsible for developing scope of work details for instrument and electrical discipline. Serves as a Project Team Leader if required and serve as responsible person for the project success (Cost, Timing and Quality). Participates in the Process Safety Engineering Team to effectively implement and manage the Facility’s Safety Instrumented System (SIS) safety life cycle phases. Proficiency in SIF Design and SIL implementation as well as working knowledge and proficient of IEC 61511. Provides Instrument/Electrical expertise to the plant as required. Provides start-up assistance for new installations as required. Participates in Process Safety Management studies such as Design Hazard Reviews, Process Hazard Analysis, Layers of Protection Analysis and incident investigations. Addresses assigned action items resulting from these studies. Responsible for performing equipment design calculations and providing equipment specifications for the purchase of new instrumentation and electrical equipment. Responsible for determining drafting resource requirements and requesting resources when required. Responsible for developing spare parts list for new instrumentation and electrical equipment. Responsible for conducting project meetings when required. Accountable for project implementation, including field inspection, problem solving, and coordination. Proficiency utilizing the SIL calculation tools, SLM, exSILentia software. Work knowledge of aeShield and Isograph FaultTree+ analysis. Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet site objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, and Safety initiatives as set forth by the company. Participates in and completes company-required training programs. This position offers a highly competitive compensation package, including paid time off, health insurance benefits, and matching retirement contributions. Ideal Background Education: Bachelor or Master of Science degree in Electrical Engineering, Computer and/or Control Systems from an accredited university is required. Certifications: CSFE/CFSP professional certification is preferred. Experience: This position requires 5+ years of relevant experience in I/E and SIS Engineer is required. 2+ years of Project Engineering experience is required. Required Knowledge, Skills, and Abilities: Knowledge and application of the current version of the National Electrical Code (NEC). Familiarity with specifications and installation details of construction bulk materials and equipment. Ability to perform lighting level calculations. Ability to size wire, conduit and overcurrent protection for both lighting and power applications. Ability to perform voltage drop calculations. Ability to route conduit and cable tray. Ability to calculate tray and conduit fill. Ability to determine motor control center loading. Ability to create accurate electrical installation documents from the information found on vendor equipment drawings. Ability to determine load center unit substation loading. (Instrumentation) Ability to size control valves using appropriate software. (Instrumentation) Ability to develop specifications and data sheets for instrumentation, analyzers, control systems and actuated valves. (Instrumentation) Familiarity with standards that apply to instrumentation and controls (ISA). Ability to develop equipment specifications for equipment such as motor control centers, variable frequency drivers, induction and synchronous motors, load center unit substations. Knowledge and understanding of schedule constraints and information requirements for the production of all electrical deliverables. Ability to develop a construction cost estimate, a detailed engineering schedule and a man-hour budget for a small project or an area for a larger project. Knowledge and application of company engineering design and CAD drafting standards. Working knowledge of CAD software, either AutoCAD, Microstation or both. Proficient in the use of Microsoft Word, Excel and Outlook. Excellent communication skills, both verbal and written. Good presentation and Virtual team skills. Physical Requirements: Ability to sit, stand, or walk for long periods of time. Hargrove Culture We work to create an environment founded on trust, personal integrity, and a “team mentality” so that each person understands the value of their contributions both on a project and company-wide level. We know that each person on our team contributes to the success of our company by pairing expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our safety culture protects and promotes the well-being of every person who works with us and every person touched by our work. As a 100% Teammate owned company, we proudly offer a comprehensive benefits package including, paid holidays, personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible Teammates. Equal Opportunity Employment Statement Hargrove is an Equal Opportunity/Affirmative Action employer. We do not discriminate based upon race, color, national origin, religion, age, sex (including gender, sexual orientation, pregnancy, sexual identity, marital or family status), disability, military service or obligations, veteran status, or any other characteristic protected by law. Hargrove is a drug-free workplace. The selected candidate must be authorized to work in the United States. Welcome About Us Hargrove is passionate about serving our clients within our industry and the local economy, and we recognize that our impact goes beyond building great projects. Our extraordinary teammates serve the community with their time, talent, and generosity. The Hargrove team is a family whose volunteerism makes a huge impact on our communities, and The Hargrove Foundation is the vehicle for making a true difference in the lives of others. We work to create an environment founded on trust, personal integrity, and a “team mentality” so that each person understands the value of their contributions both on a project and company-wide level. Hargrove has consistently been ranked one of the “Best Firms to Work For” by organizations such as ZweigWhite and Business Alabama. We pair expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our teammates strive to expand their knowledge and contribute to the success of the organization. Get Connected Stay informed about new opportunities that are relevant to your profile. #J-18808-Ljbffr

Dynamic Environment

Instrumentation Engineer

LanceSoft, Inc. Port Neches, TX

Job Title: I/E Maintenance & Reliability Engineer Location: Port Neches, TX Pay Range: $55-$62.00/hr (W2) What are the shift hours? Day shift only. 5-8’s or 9-80 schedule available JOB DESCRIPTION: The I&E Maintenance Engineer is responsible for providing both instrument and electrical engineering expertise to an assigned area of the site. This position is to assure proper design, change management, installation and repair of instrument and electrical equipment according to regulatory and standards. This position will be the focal point for all changes involving, but not limited to; instrumentation, control valves, motors, switchgear, motor control centers/starters and transformers. The I&E Engineer will work closely with engineering, maintenance, and operations to understand needs and requirements and to provide a design and installation package. The I&E Engineer is responsible for Management of Change (MOC) for the assigned area, assist with turnaround scope development, and initiating change requests during turnarounds for impacts to instrumentation, valves, electrical equipment, motors, and the like. Prioritized Essential Job Functions and Responsibilities: With moderate supervision and moderate decision-making: • Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. • Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. • Provide PM development input, primarily through the RCM AMP process. • Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. • Provide support for T&I (turnaround and inspection) work scope development. • Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. • Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. • Assist with the site’s bad actor program. Identify the site’s bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. • Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Including but not limited to: • participates in all phases of capital projects; (e.g. ensure project complies with site standards, practices and goals) power study reviews, specification reviews, participation in HAZOP/DHR, provide alternative selection/options with multiple solutions. • Ensure projects are designed for maintainability and reliability. • Assist in set up of spare parts as required. • Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. • Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. • Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. for very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option • Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. • Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). • Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. • Work collaboratively with team members with different backgrounds and perspectives. • Assists other employees in accomplishments of company goals. Follows instructions and performs other duties as may be assigned by supervisor. • Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. Education/Experience/Skills Requirements: List any specific education or experience: • BS Electrical Engineering or equivalent required • 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred List any specific education or experience: • TWIC – Must have or be able to obtain TWIC card Specific Skills and Knowledge: • Must have a level of proficiency with Internet, Email, and Microsoft programs • Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. • Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows • Strong communication and documentation skills • Willing and able to learn on the job • Knowledge of risk-based work prioritization methodology • Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost) • Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired

Posted 12 hours ago

Electrical Reliability Engineer

Manpower Group Inc. Port Neches, TX

We are seeking an experienced Electrical Reliability Engineer for our client, a leader in the Petrochemical industry in the Beaumont/Orange/Nederland/Port Arthur/Port Neches area. In this role, you will help develop and steward reliability systems and processes that will improve the site’s overall electrical equipment reliability. This role is expected to influence the culture of the site to design, operate, and maintain site electrical assets with a reliability focus, and to provide the site with tools and systems to allow continuous reliability improvement. What will be expected from you? Contribute to the RCM strategy development for electrical equipment and stewards the implementation of the strategies. Maintain/update the sites Asset Management Plans based on equipment failures, process changes and Preventative Maintenance (PM) data. Provide PM development primarily through the RCM process. Own and steward site predictive maintenance program for electrical equipment. Gatekeeper for new or modified PM's through the PM request and approval flow. Steward, audit, and improve electrical equipment PM programs to ensure the health and effectiveness of the systems. Provide risk-based prioritization support for T&I (turnaround) work scope development. Responsible for the investigation and follow-up documentation of high impact or high potential impact incidents involving electrical equipment. Provide reliability support and consultation for problem analysis, risk assessment, root cause analysis, etc. for very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option. Support the identification and improvement of electrical equipment bad actors. Help to identify the site’s bad actors based on a predefined combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. Perform design for reliability reviews for capital projects involving electrical equipment and apply reliability systems (criticality assessment, RCM, spare parts, etc.) to relevant projects. Evaluate maintenance or capital project alternatives based on economic/risk analysis and life cycle cost analysis. Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. Develop risk-based improvement plans for electrical infrastructure. Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the ideal candidate? Bachelor’s degree in Instrumentation or Electrical Engineering required. Minimum of 10 years relevant engineering experience in a petrochemical or refining facility required. Must have or be able to obtain TWIC card. Must have a level of proficiency with SAP, Internet, Email, and Microsoft programs. Knowledge of risk-based work prioritization methodology. Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost). Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired. Prior experience in I/E Project Engineering and/or I/E Maintenance Engineering is desired. The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Sr. Advanced Process Control Engineer

Indorama Ventures Port Neches, TX

Job Description : Provide advanced process control (APC) technical expertise to support the design, configuration, implementation, and online performance assessment of the Regional APC applications. Assist Operations in driving value from the application and keep the APC applications in a well-ordered state with high online time. What will be expected from you? Responsible for Advanced Control Applications (APC) in the assign processing units/site (s). Identify APC use opportunities and evaluate economic incentives. Develop, Design, Commission and Tune APC controllers. Build and implement inferential models where need be. Collaborate with Operation teams to develop the pre-APC baseline measurements of performance to be used for evaluating the APC application performance and value. Central participant in the Analysis, Design, Revamping and Tuning of existing multivariable constraint control applications. Lead the effort to drive value from APC applications' use and maintain high availability of APC applications along with APC models and tuning. Perform Post-Implementation Audit of APC performance and track ongoing APC performance. Participate on Six Sigma teams to evaluate and implement identified projects. Maintain expertise in process and process control matters related to assigned units through participation in professional meetings, trade shows, continuing education opportunities, and publications. Facilitate compliance with alarm system management policies and standards, for assigned process units. This may include leadership of the operational review meetings, and activities to rationalize alarm settings and priorities to meet KPI targets. Participate in the plant Behavior Based Safety Process. Train operators on process control changes. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assist other employees in accomplishments of Indorama company goals. Follow instructions and performs other duties as may be assigned by supervisor. Participate in Environmental, Health, & Safety initiatives as set forth by the company. Participate in and complete company required training programs. What are we looking for in the Ideal candidate? Bachelor of Science degree required; Bachelor of Science degree in Chemical or Electrical Engineering is preferred, other BS degrees such as Mathematics, Mechanical Engineering or Computer Science may be considered if paired with experience in Advanced Process Control applications; Master or PhD in related field is a plus. Minimum of 8 years of process control engineering experience in a petrochemical or refining industry setting required, with at least 3 years of Advanced Process Control experience preferred. 10+ years of process control engineering experience, including 5 years of Advanced Process Control experience in a petrochemical or refining industry setting is preferred. Advanced Process Control engineering experience highly preferred Experience with a commercial DCS system commonly used in the petrochemical or refining industries required. Experience with process engineering in the petrochemical or refining industries required. Aptitude with relevant industry computer applications MUST HAVE or be able to obtain TWIC card. Must be proficient in use of Microsoft Office, Internet, E-mail, and other technical or business relevant applications. Preferred familiarity with either Emerson DeltaV and/or Foxboro I/A distributed control system (DCS). What can we offer you? Indorama Ventures - Indovinya is a global and innovative chemical company, offering sustainable and high-value solutions for the long-term success of our customers. As producers of solutions used in Crop Solutions, Energy & Resources, Home & Personal Care, Coatings, Performance Products, and other applications, we are present in the daily lives of millions of people around the world. The successful candidate will receive competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! #LI-Onsite Additional Locations:

Instrumentation Electrical Capital Projects Engineer

Manpower Engineering Port Neches, TX

We are seeking an experienced Projects I&E Engineer for our client, a leader in the Petrochemical Manufacturing Industry. The primary objective of the Instrument/Electrical (I/E) Project Engineer is to drive project implementation. In this role you will develop and steward project systems/processes, which will help improve the site's overall instrumentation and electrical assets. This role is located in the Beaumont/Port Arthur/Orange/Port Neches/Nederland area. What will be expected from you? Provide design engineering support for projects. Responsible for developing scope of work details for instrument and electrical discipline. Serve as a Project Team Leader if required and serve as responsible person for the project success (Cost, Timing and Quality). Provide Instrument/Electrical expertise to the plant as required. Provide start-up assistance for new installations as required. Participate in Design Hazard Reviews. Responsible for performing equipment design calculations and providing equipment specifications for the purchase of new instrumentation and electrical equipment. Responsible for determining drafting resource requirements and requesting resources when required. Responsible for developing spare parts list for new instrumentation and electrical equipment. Responsible for conducting project meetings when required. Accountable for project implementation, including field inspection, problem solving, and coordination. Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet site objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, and Safety initiatives as set forth by the company. Participates in and completes company-required training programs. Qualifications: BS in Electrical Engineering and 5+ years of experience in I&E Project Engineering. MUST HAVE or be able to obtain a TWIC Card Must have a level of proficiency with SAP, Internet, Email, and Microsoft Office programs. Benefits: The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k.

Process Design Engineer

Indorama Ventures Port Neches, TX

Job Description : Indorama Ventures is currently looking for a dynamic individual to work as a Process Design Engineer at our Port Neches, TX or Remote or any Indovinya location. In this role, you will provide process analysis and design for Indovinya's olefin, oxides, oxide derivatives, and specialty chemical manufacturing units. Activities include identifying, defining, justifying, and implementing capital and non-capital improvement projects improving operational effectiveness and meeting business objectives. In addition, this role participates in unit problem troubleshooting, process hazard analysis and other process analysis support of operating units. This role also supports Technology Licensing activities. What will be expected from you? The preferred candidate will acquire, develop, and practice Chemical Engineering design skills. The role will have collaborated with other process design experts and will work independently as process analysis and design capabilities allow. Promotes Safety and safe behaviors by actively engaging in Personal Safety programs and Process Safety Management activities. Participates in reviews related to process design including Design Package reviews, Hazard, and Operability studies (HAZOP), Layers of Protection Analysis (LOPA), Incident Investigations, and Pre-Startup Safety Reviews (PSSR). Develops personal capabilities in a broad set of process engineering tools including process simulation, heat transfer design, fluid dynamics analysis, distillation/separation design and other related process engineering design tools. Works on developing improvement concepts and preparing feasibility studies including high level project scoping and economic analysis. Provide process engineering design through Front End Loading stages 1,2 & 3. Completes Process Design Packages to support process improvements which includes PFD and P&ID development, equipment and instrumentation process spec sheets and preliminary Process control strategies. Effectively completes the Front-End Engineering and Design (FEED) activities and follows the Project Implementation Process. Functions as process design engineer on licensing and capital projects developing PFDs, P&IDs, and multiple design data sheets for a variety of process equipment and processes. Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the ideal candidate? A Bachelor's Degree in Chemical Engineering is preferred. Degrees in other engineering or related disciplines will be considered with relevant experience. Advanced degrees are a plus. 2-15 years' experience. 2 years' operating experience in a chemical or similar process is preferred. Operational experience with Ethylene, Ethylene Oxide or their derivatives is preferred. Must have or be able to obtain a TWIC card. Fluent in current version of Aspen Plus or equivalent simulation software is a plus. Proficiency in several Chemical Engineering sub-disciplines (fluid flow, heat transfer, distillation/separations, process control, modeling, reaction engineering) is a plus. Analytical thinker with conceptual understanding and ability of applying experience and knowledge to identify best solutions. Knowledge of sound engineering practices. Strong planning and organizational skills. Strong written, verbal communication, and presentation skills. Must be proficient in use of Microsoft Office, Internet, E-mail, and other technical or business relevant applications. What can we offer you? Indorama Ventures - Indovinya is a global and innovative chemical company, offering sustainable and high-value solutions for the long-term success of our customers. As producers of solutions used in Crop Solutions, Energy & Resources, Home & Personal Care, Coatings, Performance Products, and other applications, we are present in the daily lives of millions of people around the world. The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us! Additional Locations:

Maintenance Reliability Engineer

LanceSoft, Inc. Port Neches, TX

I/E Maintenance & Reliability Engineer Port Neches, TX 12+ months (Contract to Possible Extension or Conversion) $45-59.00/hr W2 (All Inclusive) Top 3 Must-Have Skills 1. BSEE or equivalent required, experience preferred (ideally at a petrochemical plant) 2. technical troubleshooting/root cause analysis 3. Self-motivation General Purpose of Job: The I&E Maintenance Engineer is responsible for providing both instrument and electrical engineering expertise to an assigned area of the site. This position is to assure proper design, change management, installation and repair of instrument and electrical equipment according to regulatory and Indorama standards. This position will be the focal point for all changes involving, but not limited to; instrumentation, control valves, motors, switchgear, motor control centers/starters and transformers. The I&E Engineer will work closely with engineering, maintenance, and operations to understand needs and requirements and to provide a design and installation package. The I&E Engineer is responsible for Management of Change (MOC) for the assigned area, assist with turnaround scope development, and initiating change requests during turnarounds for impacts to instrumentation, valves, electrical equipment, motors, and the like. Prioritized Essential Job Functions and Responsibilities: With moderate supervision and moderate decision-making: • Provides electrical and instrument technical support for maintenance, operation and troubleshooting of site instrumentation, control, electrical equipment, and systems. • Participate in RCM Asset Management Plan (AMP) development and stewards the implementation of the plan requirements. • Provide PM development input, primarily through the RCM AMP process. • Audit, and improve instrument and electrical equipment PM programs to ensure the health and effectiveness of the systems based on equipment failures, process changes and PM data. • Provide support for T&I (turnaround and inspection) work scope development. • Participates and/or leads in the investigation and follow-up documentation of high impact or high potential impact incidents. • Works with operating and maintenance engineers to make recommendations to improve long term equipment operability, reliability, energy efficiency, and maintenance expense. • Assist with the site’s bad actor program. Identify the site’s bad actors based on a combination of production loss and failure frequency. Drive the organization to find true root cause and effective mitigations to systematically eliminate bad actors. • Provides resource and leadership guidance for instrumentation and electrical systems as part of site investments and/or modifications. Including but not limited to: • participates in all phases of capital projects; (e.g. ensure project complies with site standards, practices and goals) power study reviews, specification reviews, participation in HAZOP/DHR, provide alternative selection/options with multiple solutions. • Ensure projects are designed for maintainability and reliability. • Assist in set up of spare parts as required. • Provide capital and expense project ideas based on reliability analysis and feedback from operations and other site personnel. • Provide early input on project maintainability and reliability considerations to ensure major scope is not missed during project development. • Provide capital investment and expense project ideas based on reliability analysis and feedback from operations and other site personnel. Provide support as a facilitator for problem analysis, risk assessment, root cause analysis, etc. for very critical equipment failures where the failure root cause is not well understood or there are multiple options for resolution without a clear leading option • Interfaces with diverse groups including instrument technicians, electrical technicians, process operators and engineers, rotating equipment specialist and engineers, process control engineers and maintenance/operation team leaders. • Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). • Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. • Work collaboratively with team members with different backgrounds and perspectives. • Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. • Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. Education/Experience/Skills Requirements: List any specific education or experience: • BS Electrical Engineering or equivalent required • 0-2 years I&E Maintenance or Reliability Engineering experience required, 5 years I&E Maintenance or Reliability Engineering experience preferred List any specific education or experience: • TWIC – Must have or be able to obtain TWIC card Specific Skills and Knowledge: • Must have a level of proficiency with Internet, Email, and Microsoft programs • Knowledge of control systems including control valves, transmitters, pneumatic and electronic instrumentation, PLC/DCS, etc. • Basic understanding of engineering, purchasing, accounting and construction practices and maintenance workflows • Strong communication and documentation skills • Willing and able to learn on the job • Knowledge of risk-based work prioritization methodology • Knowledge of economic evaluation methods (Life-Cycle Cost Analysis, NPV, Benefit/Cost) • Knowledge in Reliability Centered Maintenance or some form of Asset Management Plan Development is desired